To engage the PTO of a Massey Ferguson 135 tractor, you simply flip the toggle switch of the PTO to the on position.
The hydraulic lift cover mechanism is influenced by the operator using the draft & position control levers, an implements pulling or pushing force on the toggle spring & the upward or downward movement of the lift cover arms. Massey Ferguson Lift ProblemsCommon symptoms are the need for high engine revs to get the tractor to. Massey Ferguson 135 PTO Not Engaging When On.
It either pumps oil or dumps oil or both through the control valve. The hydraulic system is influenced by the mechanics of the lift cover. They work in offering lowering, lifting, and tilting of the arms. The lift arms are controlled directly by the hydraulic system. Together with the other components, they work together inside the hydraulic system of the tractor. The oil in the ram cylinder returns through the same standpipe & dumps. The lift arms are among the major components of the three-point hitch of the Massey Ferguson 135 tractor model. When the operator places the lever in the down position the lift covers mechanism closes the pumps control valve and the pumps pressure is dumped back into the diff housing. When oil enters the ram cylinder it forces the piston forward and the arms are raised. The oil flows up through the standpipe between the pump & lift cover. Four pistons moving back & forth suck oil in through the chambers and push it out through the same chamber outlet valves. NOTE: Do not operate starter motor continuously for more than 30 seconds without aI/owing a few minutes for cooling. Draft Control Rocker Link Hydraulic Massey Ferguson 35, 35x art.nr:30/665-1 /41364 /VPK4008 /A4341 /K180973 Draft Control Rocker Link Massey Ferguson FE35. When the tractors engine is running the hydraulic pump operates continuosly getting its drive from the transmission PTO output shaft. With fuel shut-off control in run position, move hand throttle to full-open position, crank engine with starting motor until air-free fuel flows from connections.
0 kommentar(er)
